A Time-Travelling Journey What People Said About Replacing A Window Handle 20 Years Ago

Tips For Replacing a Window Handle

It is simple to change your window handle in the at-home comforts of your home. Use these helpful tips to ensure an easy operation and a beautiful looking finish.

Remove the screw covers from your uPVC handle to expose the screws. Take a measurement of the spindle to be sure you are getting the correct size replacement.

1. Measure the Spindle Length

When replacing a window handle, it's crucial to determine the size of the spindle correct. This is because it will affect how tight or loose the handle is and whether it will lock correctly within the frame of the window. The spindle is a metal shaft that connects the handle to the lock on the frame of the window. The spindle is available in either the standard 8mm cross-section for industry or older versions that measure 9mm. Modern industry standards are 8mm, but it wasn't always the case. It is important to confirm the measurements before purchasing a new handle.

Remove the handle. This is done by turning the handle to the open position, and unscrewing two screws that secure the handle (which are usually hidden behind plastic caps that are required to be removed). After removal, take a measurement from the base of the handle until the end of the spindle. This will give you the measurements needed to buy a replacement.

There are a variety of options when it comes time to choose a new window handle. From sleek chrome that fits in with a modern style, to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more quaint Tudor Cottages with curled mongoose-tail latches. There are a lot of options, but the most important is to pick a style that matches your home.

Espag handles are commonly used to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles are available in a range of sizes, starting at 58mm up to 62mm. Cadenza  window handles  have an entirely different dimension due to their bent blade that is used to operate the multi-point lock mechanism within the window.

Another aspect to consider when selecting the right window handle is knowing what hand you require, this is simply defined by the hand you use to open the door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles can only be used for windows that are open in one direction.

2. Remove the Handle

Whether the handle is damaged or worn out, a window handle that is shattered is a major source of frustration. The good news is, you can repair the uPVC handle by yourself. You'll need only the most basic hand tools and some time to complete this process.

You must first open the window, and then ensure that it's not locked. Then, take off the screw caps holding the handle in place. After the screw caps are removed then you'll be able to remove the handle.

The handle is connected to a spindle within the window frame. Depending on the type the handle is secured by a screw or pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both of these types of handles are used on casement windows, including aluminum windows. You can lock the handles with a key to block access by unauthorised persons from the outside. You can also lock the handles by turning them clockwise.

To remove the handle you will need a flat-bladed screwdriver. Once the clip is released, the handle should slide off the spindle. Once the old handle is removed, you'll have to determine the length of the spindle in order to make sure that the new handle is compatible with the spindle's length.

Once you have the right size, you can fix the new handle into the correct position. It is crucial to make sure that the handle is securely fastened and that it rotates in the correct direction (clockwise if the handle is open or counterclockwise if the handle is closed). It is important to make sure that the handle hasn't been installed upside down.

Replace the cap screws. After you've completed this step, you can test the handle to be sure that it's working properly. You can also test the locking mechanism by moving the handle from an unlocked position to the locked and back.

3. Remove the Screws

A uPVC handle is an important component of any house and is the first thing that shows signs of wear or damage. It can be caused by natural elements or by regular use, or malicious damage caused by opportunistic criminals who may wish to open a locked window and gain entry to your home. A simple repair can fix the issue and prevent it from occurring again.

UPVC handles can be difficult to open when the locking mechanism isn't working properly. It is often possible to fix the issue by replacing the multipoint locking mechanism rather than the entire handle. This can save you money.

After you have removed the handle, you'll have to remove the screws that secured it. These screws are usually located on the inside of the base of the handle. You may require an screwdriver to do this, and it's important to not over tighten, as this could cause the handle to loosen.

You'll then have to locate the fixing pins or screws that hold the new handle in place. These are likely to be found on the inside of the base of the handle and you will need to use either a screwdriver or pair of pliers to remove the screws. Once they're removed you will be required to replace the screw caps should you choose to do so, and then test the new handle to make sure it's functioning properly.

When you're ready to install the new handle, simply align the spindle with the cutout in the window mechanism and screw it into place. Make sure the handle is in an open position and that the screws are tightly fixed before replacing the screws' covers in the event that you want to do so. Once this is complete you're all done and you can enjoy your newly replaced window handle. We hope this will allow you to save money on replacement of your door and window in the future. If you'd like more help in this, or any other aspect of your uPVC windows, don't hesitate to contact us.

4. Install the new handle

The replacement of a damaged window handle or updating it is simple and can be completed within only a few simple steps. Identifying the kind of window handle, determining its spindle length and knowing the tools you'll require to finish the job are crucial. Always ensure safety when working with windows and tools. Make sure you follow the steps and make sure that you have the right handle for use.

To begin, find the screws that hold the window handle in place. Take them off while firmly gripping the handle to prevent it from falling and causing an injury. Once the screws have been removed they can be repositioned in a safe place to be replaced in the future.

After removing the old handle, you are now able to install your new one. The handle needs to be fitted perfectly in order to function correctly and keep the window in its closed position. Then move the metal bar that is square on the handle into the hole for the window mechanism.

The final step is to replace the screws caps and then test the handle to ensure that it works. If you're not happy with the result or if your window doesn't open and close as it should then the next step is to call our experts who can assist you.

Most homes in the UK have uPVC windows and as they are, a lot of them will need to be replaced at some point because of wear or damage. The procedure is fairly simple and can be completed by anyone with some experience in DIY. The most important factor in the success of the process is ensuring that you're using a handle that is compatible with your existing window in terms of size and design. If you're not sure what kind of handle you'll need, feel free to contact our team who will be able to provide you with the choices available.